Home | Register | Log In Your cart is empty
Currency:
 

Compaq HDD Caddy

Compaq HDD Caddy are made from the highest quality parts, the Compaq Caddy are tailored made according to the original size, whether the Caddy appearance, size and quality are the same as with the original. Every Compaq Caddy should be under strict quality control including filtration and safety testing of voltage,capacity and Compaq HDD Caddy core before leaving the factory, and has passed the authentication of CE, UL, EMC, CQC, ROHS, etc.

 
List by Compaq HDD Caddy Parts No.
 
 
List by Compaq Machine Model No.
 

How to Replace a Hard Drive?


hard drives are very easy to replace. have made the process of replacing a hard drive in a laptop a task that does not require any computer technical skills. All that is required is a couple of screwdrivers and a few minutes of time.

1. Locate the hard-drive bay on your laptop. Look for an area with a flat head screw and either a small slot or a grooved area intended to be pushed with your fingers. Use a flat-head screwdriver to remove the screw from the drive-bay cover.

2. Insert a small Philips-head screwdriver into the slot and twist to loosen the cover, or use your fingers to slide the cover away from the base of the laptop.

3. Remove the existing hard drive. In some models, there will be a small blue tab that you will gently pull with your fingers. In other models, the hard drive will be connected to the bay cover and be removed when you remove the cover.

4. Use the small Phillips-head screwdriver to remove the four screws holding the hard drive in the hard drive caddy. Remove the existing hard drive from the caddy by sliding the drive out of the base.

5. Slide the new drive into the caddy and replace the four screws to hold it in place. Insert the hard drive back into the hard drive bay on the ThinkPad. Push the drive gently until it is secure to the interior connection. If the bay cover is connected to the drive caddy, you will not need to push, as this will happen when you return the bay cover to the proper position.

6.Slide the bay cover into the proper position and screw the holding screw back into place. Turn on your computer and load your operating system and any desired software.

Enter your email address to subscribe to our Newsletter.
Copyright © 2010 BatteryStyle.com Company. All rights reserved.